xinwen

News

Professional Power Plant Desulfurization Powder And Desulfurization Gypsum Powder Production Line Of HCM

Is power plant desulfurization powder the same as desulfurization gypsum powder? Of course, the two are different. The former is mainly composed of calcium sulfate (gypsum), while the latter is gypsum powder with almost no sulfide substance. And there are great differences in the production process and production process, and the common point of both is the need to use the HCM production of Super-fine vertical grinding mill equipment to process materials.

HLMX1300 superfine pulverizer

Power plant desulfurization powder and desulfurization gypsum powder production line

Desulfurization gypsum powder production line refers to the industrial by-product gypsum obtained by combustion desulfurization purification. Desulfurization gypsum powder is different from general gypsum powder, which contains silica, sodium oxide, calcium carbonate, calcium sulfite, limestone, calcium chloride, magnesium chloride, etc. Compared with other gypsum powder, FGD gypsum powder has the characteristics of renewable, small particle size, stable composition, less harmful impurities and high purity.

Power plant desulfurization powder production line mainly uses lime powder to react with flue gas to eliminate sulfur dioxide in flue gas. Lime powder production to use calcium hydroxide production line, ash machine and grinding machinery. Generally, the fineness of lime powder with 200 mesh or 325 mesh is enough for power plant flue gas desulfurization.

In this process, limestone slurry is used as absorbent to wash the flue gas in the absorption tower and react to remove SO2 in the flue gas. The calcium sulfite produced by the reaction is oxidized into calcium sulfate (gypsum) containing two crystal water by forced oxidation, and then ground to produce gypsum powder.

Selection and price of desulfurization powder and gypsum powder equipment in power plant

HLMX Super-fine vertical grinding mill produced by HCMilling (Guilin Hongcheng):

*Disc diameter*:1000-52400mm

*Moisture of feed material*:≤5%

*Production capacity*:4-40t/h

*Product fineness*:10-45 μ m. The secondary grading can reach 5 μ m

*Application field*:It is widely used in power plant desulfurization, metallurgy, chemical industry, non-metallic ore milling, coal powder preparation and other industries.

*Application materials*: It has high yield and high efficiency grinding ability for all kinds of non-metallic mineral materials with Mohs hardness less than 7 and humidity less than 6%. For example, gypsum, limestone, calcite, marble, heavy calcium, kaolin, barite, bentonite, pyrophyllite and other grinding effect is good.

We can design the milling process for you, and provide a full set of milling production line equipment, so that you can buy all the milling equipment in HCM one-stop, without having to go back and forth, and HCM is a direct manufacturer, with favorable quotation.

HCMilling(Guilin Hongcheng) is a professional R & D and manufacturer of ore mill equipment. The new Raymond mill, ultra-fine mill, vertical roller mill, super-fine vertical grinding mill and other equipment have high grinding efficiency and greater production capacity.

If you are in need of any non-metallic grinding mill, contact mkt@hcmilling.com or call at +86-773-3568321, HCM will tailor for you the most suitable grinding mill program based on your needs, more details please check www.hcmilling.com.


Post time: Nov-19-2021