The working mode of the jaw crusher manufactured by HongCheng belongs to curved extrusion type. The motor drives the belt and pulley, and the movable jaw moves up and down through the eccentric shaft, when the moving jaw rises, the angle between the toggle plate and the moving jaw increases, so as to push the moving jaw plate to the fixed jaw plate, meanwhile, the materials are crushed or split. When the moving jaw goes down, the angle between the toggle plate and the moving jaw decreases, the moving jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring. At this time, the crushed materials are discharged from the lower outlet of the crushing chamber. With the continuous rotation of the motor, the crushing jaw makes periodic movement to crush and discharge materials for mass production.
PE series Jaw crusher has the following features:
Optimized deep cavity crushing can greatly increase the feeding and crushing efficiency, good energy-saving.
compact structure and ease of maintenance
The overall structure of the equipment is simple and compact, high crushing capacity, ease of operation and maintenance, low operating cost.
High stability and Low noise
The equipment has a stronger load-bearing capacity and higher stability, low noise, and can be equipped with dust removal equipment, and the construction environment fully meets the environmental protection requirements.
Long service life
Using latest technology, digitally analyzing the operation of each component, the internal structure is exquisite, and the service life of the equipment is greatly extended.